手机彩票网

National consultation phone:

400-966-9225

Contact Us

Henan Liangyuan Machinery Manufacturing Co., Ltd.

Hotline: 400-966-9225

机:18336374863 Mobile : 18336374863

话:400-966-9225 Phone : 400-966-9225

Company address: China-Zhengzhou-No. 100 Lianhua Street, National High-tech Development Zone

Your current location : 手机彩票网- > Corn Processing Machinery- > Corn Processing Machinery

Corn processing machinery

Corn processing machinery

Corn processing machinery

Corn processing machinery adopts dry corn peeling and germ-removing technology, and the germ removal rate reaches 90%. Corn processing machinery can produce refined corn flour (fine texture, purity, fineness of 60 ~ 80 mesh) and other products. With additional equipment, it can be further processed into polenta flakes, fast food corn flour, corn oil, corn noodles and other products. The equipment has low energy consumption, high degree of automation and reliable and convenient operation.

Product introduction:

Corn processing machinery for corn processing is based on the premise of peeling. Corn peeling generally uses wet peeling. It is required that the moisture content of the incoming corn reaches 16-17%, and the moisturizing time is about 10 minutes. It is strictly forbidden to enter the machine with water on the surface of the corn, otherwise the phenomenon of stuffy cars should occur. After the machine is running normally, open the feed insert plate and control the material flow at the feed port according to the power load. If any abnormal sound is found during operation, stop the machine immediately for inspection. In the event of stuffy cars, the feed plug-in board should be closed, and the motor wheels should be slowly turned by hand to eliminate the corn in the cabin and start up again.

Features:
(1) Small investment, energy saving, and co-production advantages. (2) The corn flour is fine, which can improve the taste of the food.
(3) Compared with the corn wet processing technology, the equipment investment of the early moist grain and the finished product drying is reduced;
(4) Complete set of corn dry processing technology, which requires no contact with water during material processing, making the processing more hygienic, simpler and less laborious;
(5) Reduce the loss of corn processing endosperm during the peeling process.

Product process:

There are two types of corn processing machinery : dry and wet, each of which has its own advantages:
Dry process application Corn processing The dry process technology has a small investment in the device, which greatly reduces the initial capital burden of the enterprise. However, the value of processed by-products is low, so the processing cost is high and the selling price is high. The wet processing technology of wet processing corn processing has the advantages of higher added value and more product types, so the production plan can be adjusted in time according to market supply and demand. However, the process of the process is quite complicated, and the investment cost for building the plant is quite high.


For more information about corn processing equipment and corn processing machinery, please go to the official website http://kcostumes.com for inquiries, or you can call the hotline 400-966-9225 for consultation, we will serve you wholeheartedly!